Flat screen TVs and monitors: Difference between revisions

No edit summary
No edit summary
Line 11: Line 11:


==Classes of device==
==Classes of device==
There are several types of flat screen (flat panel) TV's and monitors, well summarised in Wikipedia under [[wikipedia:Flat-panel_display|Flat-panel display]].  
For completeness we should mention the original [[Glossary:CRT|CRT]] screens which were the norm from the first days of television to around the 1980's when plasma and newer technologies started to replace bulky CRTs. CRTs also a very high voltage of 10-20kV (10,000-20,000 [[Glossary:Volt|Volts]]) which meant great care was required for any repair.


For completeness we should mention the original [[Glossary:CRT|CRT]] screens which were the norm from the first days of television to around the 1980's when plasma and newer technologies started to replace bulky CRTs. CRTs also required very high voltages 10-20kV (10,000-20,000 [[Glossary:Volt|Volts]]) which meant repairing required great care.
There are several different technologies used to create a flat display panel for TV's and monitors, well summarised in Wikipedia under [[wikipedia:Flat-panel_display|Flat-panel display]]. Of these, [[Glossary:LCD|LCD]] panels are perhaps the commonest but these don't in themselves, create any light but require a separate light source. This is normally along one edge and spread evenly over the whole panel by a difuser made of transparent plastic. In older devices the light source is often a cold cathode flourescent tube which requres its own high voltage supply but in newer devices it's almost invariably a row of LEDs.


So what is the distinction between a TV and a monitor?
So what is the distinction between a TV and a monitor?
Both display pictures and provide sound, the distinction comes from the source of the picture and sound signals.
Both display pictures and may provide sound, the distinction comes from the source of the picture and sound signals.
A TV has an [[Glossary:RF|RF]] tuner (receiver) that the users controls to select the programme they wish to view. It's signals arrive by radio from a remote transmitter and it will have an antenna connected to receive those signals.
A TV has an [[Glossary:RF|RF]] tuner (receiver) that the users controls to select the programme they wish to view. It's signals arrive by radio from a remote transmitter and it will have an antenna connected to receive those signals.


A monitor does not have the tuner, instead it is fed from an external source, typically a PC/laptop via cables. That said, a monitor can be fed from a freeview or satellite TV set-top box and a tuner can be used as a computer monitor, and either can be connected to a DVD or video player or a games controller.
A monitor doesn't have the tuner and often won't have speakers for sound, instead it is fed from an external source, typically a PC or laptop via cables. That said, a monitor can be fed from a freeview or satellite TV set-top box and a tuner can be used as a computer monitor. Either can be connected to a DVD or video player or a games controller provided it offers compatible inputs.


A smart TV perhaps forms a third class of device, containing both a tuner and its own computer with an Internet connection. Furthermore, you may be able to "cast" a video stream to it from your smartphone or tablet, via WiFi or Bluetooth.
A smart TV perhaps forms a third class of device, containing both a tuner and its own computer with an Internet connection. Furthermore, you may be able to "cast" a video stream to it from your smartphone or tablet, via WiFi or Bluetooth.


The first step is to clearly identify what type of TV/monitor you have because that will help you determine what the basic electronics blocks are. Usually it is fairly obvious but if unsure search the internet for information about the make and model type. The most useful model information is usually found on the back or underneath of the item.
The first step is to clearly identify what type of TV or monitor you have because that will help you determine what the basic electronics blocks are. Depending on which functions (if any) still work, you may be able immediately to narrow your disgnostic search. Usually it's fairly obvious what class of device you have from the inputs on the back but if unsure, search the internet for information about the make and model type. The most useful model information is usually found on the back or underneath the item.


==Diagnosis and Fixing==
==Diagnosis and Fixing==

Revision as of 10:29, 1 October 2021

This is currently a skeleton page. Please help by adding your contributions either here or in the associated Discussion page.

This page will cover flat screen TVs and computer monitors.

Summary

Safety

Warning03.png
As with all mains electrical devices, dangerous voltages may be exposed when opened. Be aware that capacitors can store a dangerous voltage long after power has been disconnected.

Classes of device

For completeness we should mention the original CRT screens which were the norm from the first days of television to around the 1980's when plasma and newer technologies started to replace bulky CRTs. CRTs also a very high voltage of 10-20kV (10,000-20,000 Volts) which meant great care was required for any repair.

There are several different technologies used to create a flat display panel for TV's and monitors, well summarised in Wikipedia under Flat-panel display. Of these, LCD panels are perhaps the commonest but these don't in themselves, create any light but require a separate light source. This is normally along one edge and spread evenly over the whole panel by a difuser made of transparent plastic. In older devices the light source is often a cold cathode flourescent tube which requres its own high voltage supply but in newer devices it's almost invariably a row of LEDs.

So what is the distinction between a TV and a monitor? Both display pictures and may provide sound, the distinction comes from the source of the picture and sound signals. A TV has an RF tuner (receiver) that the users controls to select the programme they wish to view. It's signals arrive by radio from a remote transmitter and it will have an antenna connected to receive those signals.

A monitor doesn't have the tuner and often won't have speakers for sound, instead it is fed from an external source, typically a PC or laptop via cables. That said, a monitor can be fed from a freeview or satellite TV set-top box and a tuner can be used as a computer monitor. Either can be connected to a DVD or video player or a games controller provided it offers compatible inputs.

A smart TV perhaps forms a third class of device, containing both a tuner and its own computer with an Internet connection. Furthermore, you may be able to "cast" a video stream to it from your smartphone or tablet, via WiFi or Bluetooth.

The first step is to clearly identify what type of TV or monitor you have because that will help you determine what the basic electronics blocks are. Depending on which functions (if any) still work, you may be able immediately to narrow your disgnostic search. Usually it's fairly obvious what class of device you have from the inputs on the back but if unsure, search the internet for information about the make and model type. The most useful model information is usually found on the back or underneath the item.

Diagnosis and Fixing

CRT TVs and monitors

Fixing these requires a very clear awareness of high voltages and any opening and repair should be done with full knowledge of how to identify the danger areas. The CRT also requires care with handling, dropping the glass tube which has a vacuum inside can result in an explosion of glass particles which will cause serious injury. Not a job for a repair cafe event.

Plasma TVs and monitors

LCD TVs and monitors

LED TVs and monitors