Translations:Sticky Stuff/146/en: Difference between revisions

(Importing a new version from external source)
 
(No difference)

Latest revision as of 09:55, 3 February 2023

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Sticky Stuff)
[http://www.bareconductive.com/ Bare Conductive] is an electrically conductive paint which you may be able to use to bridge a broken connection. It has a much higher resistance than copper or solder and so isn't suitable where a low resistance connection is required or where it must carry more than a few mA. It should be fine, however, for connections to an LCD, or to the momentary-contact push buttons on nearly all modern electronic equipment.

Bare Conductive is an electrically conductive paint which you may be able to use to bridge a broken connection. It has a much higher resistance than copper or solder and so isn't suitable where a low resistance connection is required or where it must carry more than a few mA. It should be fine, however, for connections to an LCD, or to the momentary-contact push buttons on nearly all modern electronic equipment.