Combined display of all available logs of Restarters Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

• 22:40, 14 April 2023 Imake talk contribs uploaded File:90F88DA4-A798-4A68-B1E5-B772458A620F.jpeg (1. First, remove the components, such as the PCB. Preheat the PCB until the solder becomes molten, and then remove the PCB with a vacuum. One thing to be careful of here is damage to the BGA pads when you remove the BGA itself. If you haven’t properly heated the BGA or haven’t achieved full saturation and flow of the solder, then attempting to remove the BGA pads can simply turn the entire component into an expensive mess. 2. Next, remove the residual solder. The site should be fixtured to h...)