Advanced hard disk tools: Difference between revisions

No edit summary
Line 37: Line 37:
It can be installed by the shell command
It can be installed by the shell command


<tt>sudo apt-get install gddrescue</tt>
::<tt>sudo apt-get install gddrescue</tt>


The command <tt>man ddrescue</tt> gives full details of options, but these are many and worth familiarising oneself with in advance.
The command <tt>man ddrescue</tt> gives full details of options, but these are many and worth familiarising oneself with in advance.
As a simple example, to clone a failing disk /dev/sdb to a replacement /dev/sdc or equal or larger size, use the following commands:
::<tt>ddrescue /dev/sdb /dev/sdc logfile</tt>
::<tt>ddrescue -r3 /dev/sdb /dev/sdc logfile</tt>
(If you have used ddrescue before, be sure to use a different logfile name, or delete the old logfile first, it will assume you are continuing a previous rescue.)
The first command will hopefully complete the job, creating a logfile recording what it actually achieved.
The second command retries any blocks recorded in the logfile as having failed, up to a total of 3 times (including once in the first command). The logfile is updated accordingly, to show what has now been achieved. The command
::<tt>ddrescuelog logfile</tt>
reports the content of the logfile.


==gdisk==
==gdisk==

Revision as of 20:51, 5 July 2015

Advanced tools for diagnosing and recovering hard disk problems.

Summary

The pressure to deliver ever greater storage capacities means that hard disk vendors push the storage density to such a level that they can only just read the data back. This is shown dramatically in a [YouTube video] which demonstrates that you can give a hard disk a hard time simply by shouting at it!

Most of the techniques and utilities described below can be used equally on SSDs (Solid State Disks), but before doing so you should understand their unique features and problems by reading SSD Migration and Troubleshooting.

The S.M.A.R.T. data returned by a hard disk can give a useful indication of its health but its interpretation is vendor-specific and not fully documented. There are other tools that can be used which may be much more informative.

Safety

Warning03.png
Some of these tools can be DANGEROUS and should only be used in a kill-or-cure situation or if you are certain that a full system backup is available and you are sure you know what you are doing.

Hard Disk Error Handling

Before proceeding, it's important to understand how hard disks handle errors.

The space on a hard disk is made up of sectors, each 512 bytes, or for large disks, 4096 bytes long. Each has Error Correction Code (ECC) bits appended, and using these the disk firmware can correct read errors up to a certain number of consecutive bits. Such errors are corrected by the disk without bothering the user or the host computer, retrying the read operation multiple times if necessary. Furthermore, if the disk finds a sector which is becoming marginal (i.e. it only just managed to correct an error) it may automatically allocate a spare sector and rewrite the data to the spare, marking the original as bad.

The strategy for doing this may vary, but is roughly as follows:

  1. If a read is (eventually) successful, provided the number of retries and/or the level of error correction required (if any) were below a certain threshold, then do nothing.
  2. If the retries and/or error correction were above that threshold, but the data was still recovered, remap the sector (i.e. rewrite the data to a spare sector and mark the original as bad).
  3. If the data couldn't be recovered, mark the sector as "unstable", increment the count of "pending" sectors and return an error to the host computer.
  4. If the sector had previously been marked unstable but is now read correctly, remap it and decrement the "pending sectors" count.
  5. If a write occurs to a sector marked as "unstable", remap it by diverting the write to a spare sector and decrement the "pending sectors" count.

SSDs operate a similar but often vendor-specific strategy.

The number of pending sectors is reported directly in the S.M.A.R.T. data.

Speedfan

Speedfan is the easiest of hard disk tools to use. It runs under Windows and gives vital statistics of a system, such as temperatures. But a very useful additional function is that it reports SMART data, and more than that, can compare the state of your hard disk with an online crowd-sourced database to show how your hard disk is ageing compared to others of the same model. Select the S.M.A.R.T. tab and click the "Hard disk" box to select yours. Review the results, then click the "Perform an in-depth online analysis" in order to get a customised online report, which will appear in a browser window.

ddrescue

ddrescue is a linux tool for copying disks sector by sector. As such, it resembles the venerable Unix and linux utility dd but that is as far as the resemblance goes. Unlike dd, it will persist if it gets a read or write failure, and keeps a log of the blocks it has successfully processed. This makes it possible to run it multiple times, attempting to recover as much data as possible. It may therefore be a useful first tool to try in recovering data from a failing disk.

It can be installed by the shell command

sudo apt-get install gddrescue

The command man ddrescue gives full details of options, but these are many and worth familiarising oneself with in advance.

As a simple example, to clone a failing disk /dev/sdb to a replacement /dev/sdc or equal or larger size, use the following commands:

ddrescue /dev/sdb /dev/sdc logfile
ddrescue -r3 /dev/sdb /dev/sdc logfile

(If you have used ddrescue before, be sure to use a different logfile name, or delete the old logfile first, it will assume you are continuing a previous rescue.)

The first command will hopefully complete the job, creating a logfile recording what it actually achieved.

The second command retries any blocks recorded in the logfile as having failed, up to a total of 3 times (including once in the first command). The logfile is updated accordingly, to show what has now been achieved. The command

ddrescuelog logfile

reports the content of the logfile.

gdisk

Gdisk is a Linux command line tool for partitioning hard disks, included as standard in some disttros such as SystemRescueCD but installable on any other. Conceptually, it is similar to the DOS fdisk command but is much more flexible, can cope with large disks, and may be able to partition or repartition a disk that other tools refuse to on account of bad sectors.

MHDD

MHDD screenshot

MHDD is a low level diagnostic and maintenance tool that runs under MSDOS or FreeDOS. It's best run from a DOS bootable USB memory stick. If you have Spinrite on a memory stick, add this to it too.

Faced with a slow running computer, MHDD will show very clearly whether the problem is a failing hard disk, performing many retries in order to read data.

Warning03.png
WARNING: MHDD will destroy data if not used with care.

MHDD is basically a user interface to the ATA command set and more. A key feature is that it accesses the disk direct rather than going through the BIOS and hence gets a more accurate and uncensored view. For example it can read the SMART data even if the BIOS hides it. The following is a very brief survival guide to the most useful functions.

Config and Command line flags

Normally MHDD disables access to the primary disk as a precaution, on the assumption that this may well be what DOS is running from. This won't be the case if you're booting from a USB memory stick unless that's what you want to examine.

In order to enable access to the primary disk, create a folder (if it doesn't already exist) called CFG within the folder from which MHDD is run. This folder must contain a file MHDD.CFG containing the line

PRIMARY_ENABLED=TRUE

In addition, you must launch MHDD with the command

MHDD /ENABLEPRIMARY

Commands

MHDD issues a prompt, to which you can type a range of commands, a few of which are listed here. (Commands are case-insensitive.)

HELP - Gives a list of commands and brief descriptions

MAN <command> - Gives a fuller description of the named command.

PORT - Issue this command first to get a list of disks, then select the one you want by number.

EID - Report extended ID information from the disk.

SMART ATT - Report values of SMART attributes. (The F8 key is a synonym for this command.) Pay special attention to:

  • Read error rate
  • Relocated sectors count
  • Relocate event count
  • Current pending sectors

See the Wikipedia S.M.A.R.T. article for further details, and also below.

SCAN - Scan the disk

The disk is scanned, giving a graphic display of its state (as shown in the screen shot above), and with the option of remapping bad sectors.

Several options are offered in a pop-up menu, in particular:

  • Start, End - Start and end sectors for the scan, defaulting to the entire disk.
  • Remap - Attempt to remap bad sectors, provided they can be read correctly (with difficulty).
  • Erase delays - Erase sectors which take a long time to read, whether or not correctly. This should cause them to be remapped, but the data is lost.

To make sense of the Remap and Erase delays options, see Hard Disk Error Handling above.

Blocks of 255 sectors are each represented n the graphic display by a single blob. A brighter greyscale or a coloured blob indicates a slow read, suggesting the disk had trouble reading a sector. An "x" indicates a sector was unreadable.

Log files

Log files of a session are created in a sub-folder LOG in text format. Rename the LOG directory after a session so that a new session on a different disk and on another occasion will create new log files.

Spinrite

Introduction

Spinrite is a sophisticated hard disk maintenance utility, which works much harder than most others in order to recover data from failing disks. In many cases, Spinrite can use the erroneous results of many failed reads, together with error correction bits, to deduce what the data must have been. This allows Spinrite to rewrite the recovered data, causing the disk to write it to alternate spare sectors.

An important distinction needs to be understood between the function of Spinrite and the DOS or Windows CHKDSK utility. The latter operates on the logical structure of the file system, i.e. how the disk space is organised as folders and files and free space is managed, simply regarding the disk as large pool of numbered blocks. It therefore cannot correct faults in the disk itself. Spinrite, on the other hand, works on the disk as a pool of blocks with no concern about how they might be used. It is therefore equally applicable to any hard disk however it's formatted, even if taken from another device such as a PVR or hard disk iPod, just so long as it can be connected to a machine that Spinrite can run on.

Spinrite has been around for many years, and the current version 6.0 was released 10 years ago. An Internet search may reveal criticisms of it, some of it ill-informed and vituperous. Nevertheless, many unsolicited testimonials indicate that it remains a very valuable tool, whether or not it will fix the disk you are faced with today.

How to use

Warning03.png
On an SSD, you should only use Spinrite on Level 2, as Level 4 will cause excessive ageing.


Spinrite runs under MSDOS or FreeDOS and comes as a bootable CD image or .exe file, but is quite easily installed on a bootable memory stick. It costs $89 for a personal licence but comes with a no quibble satisfaction or money back guarantee. You may find a Restarter at a Restart Party who has a copy. (The Personal licence strictly only allows you to use it on your own computers, but the author, Steve Gibson, has repeatedly said that he's comfortable with its non-commercial use to help someone out. If it digs them out of a hole, you might suggest they purchase their own licence.)

Several modes of operation are used, but levels 2 and 4 serve virtually all purposes. In level 2, it does its utmost to recover data from any bad sectors, remapping it to a spare. Level 4 takes much longer, performing an in-depth analysis of the entire disk surface. This reads the disk with error correction off, causing it to remap any sectors which are becoming marginal long before they start to present a risk. Conversely, it will revert a remapped sector, copying the data back, if a good sector had been remapped due to a transient event such as a shock or electrical noise.

Spinrite is designed for use with conventional (spinning) hard disks but it can be used on Level 2, (read-only data recovery) which doesn't cause wear and can force an SSD to reallocate marginal cells. There have been multiple reports of this resulting in an SSD regaining its as-new performance after having become slow.

A drawback of Spinrite is that it can take many hours to run to completion, especially if it has to work hard to recover data. However, a computer which fails to boot may be suffering from a bad sector in the first few hundred MB, which it may be able to repair in much less time.

(A new version of Spinrite is expected during the second half of 2015 which will use very much larger buffers in order to achieve a very considerable increase in operating speed. It should also include enhancements to free it from the DOS dependence, allowing it to be run on a MAC. A suspend mode, too, is expected, which should allow it to be started during a Restart Party and then put into a low power state to give the owner time to take it home and plug it in to complete.)

Under the Hood

To understand how Spinrite achieves its magic, first read the section Hard Disk Error Handling above.

Problems arise if a read error is beyond what the ECC can correct, even retrying the read a number of times. In this case, the disk returns an error to the host computer and Windows may retry a few more times before giving up. Should the file be overwritten, the disk will recognise that this was a troublesome sector and heave a sigh of relief that nobody wanted the data after all. It will then mark the old sector as bad and write the new data to a spare sector.

But if you really did want the data in the failing sector, you're out of luck unless you have a copy of Spinrite (or a deep pocket for a commercial data recovery service). What this does is to try very much harder to read the data than either the disk itself or Windows, using all the tricks in the book and some more. If it eventually persuades the disk to perform a good (or at least an error-corrected) read, the disk will itself reallocate the data. However, Spinrite's magic is that it can often use the partial data received from many failed reads in order to reconstruct what the original data actually must actually have been, in which case it writes that back, once again, causing the disk to reallocate the data to a spare sector. In the worst case, Spinrite will write back to the disk as much data as it managed to recover from the sector, as it may be that not all of the data in the sector was needed anyway.

Spinrite has several operating levels, but is almost always used either in Level 2 or 4. Level 2 does its utmost to recover data and in the process will cause bad sectors to be swapped out with spares. Level 4 additionally gives each sector a thorough work-out with error correction disabled, having temporarily saved the contents of the sector to a spare. This provokes a a remapping of any sectors which are becoming weak, even though still serviceable by the disk's own criteria. Level 4 operates under an ultra-cautious strategy, ensuring that the data in any sector under test has been successfully written to a spare before starting the test. You can therefore safely abort a run at any point without loosing data.