PAT testing: Difference between revisions

Line 41: Line 41:


====Class Identification Summary====
====Class Identification Summary====
To determine whether an appliance is Class 1 or Class 2, run down the following checklist until you have the answer.
*Does the appliance have a square "Double-Insulated" sign? If so, it's Class 2.
*If it has a detachable mains lead, how many holes does the appliance end of the lead have (or how many pins does the socket on the appliance have)? If 3, it's Class 1, or if 2, it's Class 2.
*Can you remove the lid from the mains plug? How many wires are there connected to the plug? If 3 (brown, blue and green/yellow) then it's Class 1, but if only 2 (brown and blue) then it's Class 2.
*If you can remove the cover from the appliance, can you see how many wires emerge into it from the mains lead? If 3, then it's Class 1, but if only 2, it's Class 2.
*If you can't easily remove the lid from the mains plug or the cover from the appliance, does the mains lead have an obviously oval shape, indicating just 2 wires inside, side by side? If so, it's ''probably'' Class 2. (But a round mains lead may equally be Class 1 or Class 2.)
*Does the appliance have a metal case? Then it's ''probably'' Class 1, unless it's audio/visual equipment which may be Class 1 or Class 2.
*Does the appliance have a case made entirely of plastic, with no exposed metal parts? Then it's ''probably'' Class2. (Note that the element of a kettle is "exposed" as you could get your hand in there and you could certainly touch the water, but you couldn't get your hand inside a hair drier to touch the element.)


===Class 1 Test===
===Class 1 Test===

Revision as of 15:12, 9 October 2014

This is a basic "survival guide" to PT testing.

Summary

Portable Appliance Testing (PAT) is an essential procedure both before and after attempting to repair any mains operated electrical equipment, ensuring basic safety.

A PAT test comprises two parts: firstly a visual inspection (which in fact reveals the majority of faults), and an automated test using a PAT tester.

It's important to understand that the automated test still requires that you correctly identify the class of equipment, since if you get it wrong you could pass a faulty appliance as ok with potentially dangerous consequences.

Visual Inspection

A visual inspection generally turns up more faults than an electrical test, and shows faults that an electrical test may not. It should therefore should never be skipped.

You should perform the following checks:

  • Check for fraying of the mains lead, or cracking of the insulation. In the event of any cracking of the inner insulation exposing the copper conductors, the owner should be advised that the appliance is positively dangerous, and must not be used until the mains lead has been replaced.
  • Check for a cracked or broken plug. This will need to be replaced before the appliance can be declared safe.
  • Check that the cable clamp on the plug (and on the appliance itself, if there is one) is firmly gripping the cable and allowing no movement. Often, this can be rectified by refitting the plug.
  • Particularly on an older appliance, open the plug and check that it's correctly wired, the screw terminals are tight, and that a suitable fuse is fitted. Even if you don't open the plug, check the screws are tight. (In the case of a moulded-on plug there will be no screws and you won't be able to open it.)

(Pics to be added.)

Automated Test

Appliance Classes

Class 1

The mains lead of a Class 1 appliance has 3 wires. In addition to the Live and Neutral (which carry the electric current to, and return it from the appliance, there is an Earth wire, connected to the metal frame. In the event of a fault, this provides a much easier return path than through your body, so greatly reducing the risk of electric shock.

  • The Live is brown. (That's the colour your trousers go if you touch it!)
  • The Neutral is blue - a pretty neutral and benign colour.
  • The Earth is green, with a yellow stripe. (Green for earth should be easy for earthlings to remember.)

Class 2

Class 2 appliances just have 2 wires: Live and Neutral. They have no exposed metal parts which could possibly become live in the event of a fault.

Class 3

Class 3 appliances are low voltage devices running off batteries or a separate mains adapter (which itself might be Class 1 or Class 2). Since low voltages don't constitute an electric shock hazard, no testing is required.

Class Identification Summary

To determine whether an appliance is Class 1 or Class 2, run down the following checklist until you have the answer.

  • Does the appliance have a square "Double-Insulated" sign? If so, it's Class 2.
  • If it has a detachable mains lead, how many holes does the appliance end of the lead have (or how many pins does the socket on the appliance have)? If 3, it's Class 1, or if 2, it's Class 2.
  • Can you remove the lid from the mains plug? How many wires are there connected to the plug? If 3 (brown, blue and green/yellow) then it's Class 1, but if only 2 (brown and blue) then it's Class 2.
  • If you can remove the cover from the appliance, can you see how many wires emerge into it from the mains lead? If 3, then it's Class 1, but if only 2, it's Class 2.
  • If you can't easily remove the lid from the mains plug or the cover from the appliance, does the mains lead have an obviously oval shape, indicating just 2 wires inside, side by side? If so, it's probably Class 2. (But a round mains lead may equally be Class 1 or Class 2.)
  • Does the appliance have a metal case? Then it's probably Class 1, unless it's audio/visual equipment which may be Class 1 or Class 2.
  • Does the appliance have a case made entirely of plastic, with no exposed metal parts? Then it's probably Class2. (Note that the element of a kettle is "exposed" as you could get your hand in there and you could certainly touch the water, but you couldn't get your hand inside a hair drier to touch the element.)

Class 1 Test

Class 2 Test

Safety

As previously stated, it is essential to correctly identify the class of an appliance otherwise a faulty appliance could be passed as OK with potentially dangerous consequences.

All mains powered appliances should be PAT tested both before and after a repair is attempted.

A faulty appliance must have its mains plug removed and the owner must be informed that it is unsafe unless the fault can be immediately rectified (e.g. by replacing a cracked mains plug).

References

Template:Reflist

External links

  • External links as bullet points