Sewing machines: Difference between revisions

 
(16 intermediate revisions by 3 users not shown)
Line 1: Line 1:
This page covers the maintenance of domestic sewing machines.
This page covers the principles of operation, maintenance, and common problems encountered with domestic sewing machines.
<div class="showtoc">
__TOC__
</div>


==Summary==
==Summary==
Older sewing machines are virtually indestructible and with simple maintenance can continue to give good service almost indefinitely. Newer machines often have plastic parts which wear out quite quickly. Nevertheless, all machines can give longer service, properly cared for.
Older sewing machines, well maintained, are virtually indestructible, but newer machines often have plastic parts which wear out quite quickly. Nevertheless, all machines can give longer service with simple maintenance as described here.
 
If you're having problems with your sewing machine, here's a [https://shesasewingmachinemechanic.blogspot.com/p/what-to-check.html quick checklist] of things to try. Come back here for more details if you're still struggling.


The descriptions and accompanying pictures in this page show a vintage sewing machine probably dating from the 1950's or 60's. The advantage for demonstration purposes is that this has all the basic controls and mechanisms, easily seen rather than hidden behind plastic.
The descriptions and accompanying pictures in this page show a vintage sewing machine probably dating from the 1950's or 60's. The advantage for demonstration purposes is that this has all the basic controls and mechanisms, easily seen rather than hidden behind plastic.
Line 10: Line 15:
::Always unplug from the mains before starting any maintenance or repair work, in order to eliminate the risk of electric shock or physical injury from moving parts.
::Always unplug from the mains before starting any maintenance or repair work, in order to eliminate the risk of electric shock or physical injury from moving parts.


::When plugged in, at all times make sure either that all fingers are well away from moving parts, especially the needle, or that your feet (and anyone else's) are well away from the foot pedal.
::When plugged in, at all times make sure either that all fingers are well away from moving parts, especially the needle, and that your feet (and anyone else's) are well away from the foot pedal.


::Sewing machine oil is highly flammable and can be ignited by overheating parts or sparks from the motor. Always wipe away any excess.
::Sewing machine oil is highly flammable and can be ignited by overheating parts or sparks from the motor. Always wipe away any excess.


::Older machines particularly can easily weigh 20kg. Take care when lifting or when tipping over to service the under side.
::Older machines (in particular) can easily weigh 20kg. Take care when lifting or when tipping over to service the under side.


===Warning===
===Warning===
Line 23: Line 28:


Bobbins and needles are available at any good haberdashers. Spare and alternative feet are commonly available (check the height of the fixing screw from the base of the machine) and replacement belts shouldn't be a problem, nor replacement rubber tyres for bobbin winders. Complete bobbin winders are available for classic Singer machines using a bullet-type shuttle, but for others there are many different designs and you may have more trouble.
Bobbins and needles are available at any good haberdashers. Spare and alternative feet are commonly available (check the height of the fixing screw from the base of the machine) and replacement belts shouldn't be a problem, nor replacement rubber tyres for bobbin winders. Complete bobbin winders are available for classic Singer machines using a bullet-type shuttle, but for others there are many different designs and you may have more trouble.
===Acknowledgements===
This wiki pages is based on a Restart Skillshare session led by Jennie Caminada of [http://www.cheekyhandmades.co.uk Cheeky Handmades], with assistance from clothing reuse charity [http://traid.org.uk/ Traid] and researcher/activist Bridget Harvey.


==Sewing Machine Basics==
==Sewing Machine Basics==
Line 31: Line 33:


Beginners may also like to refer to the online tutorial [http://www.craftsy.com/class/Sewing-Machine-911/77 Sewing Machine 911]. (Free registration required.)
Beginners may also like to refer to the online tutorial [http://www.craftsy.com/class/Sewing-Machine-911/77 Sewing Machine 911]. (Free registration required.)
If you're not sure how a sewing machine manages to sew, this neat [http://boingboing.net/2016/02/10/how-a-sewing-machine-works-gi.html animation] shows it very clearly. (Note, though, that the hook doesn't necessarily rotate a full 360 degrees. On some machines it only takes it a little over 180 degrees before returning the way it came, with the thread tension pulling it the rest of the way.)


===Sewing Machine Controls===
===Sewing Machine Controls===
Line 72: Line 76:
Check that the needle is fitted correctly. The flat on the shank of the needle lies against a flat on the needle holder with the needle pushed up as high as it will go. Tighten the screw but only as much as you can with your fingers.
Check that the needle is fitted correctly. The flat on the shank of the needle lies against a flat on the needle holder with the needle pushed up as high as it will go. Tighten the screw but only as much as you can with your fingers.


Ensure the bobbin is the correct type for the machine and is threaded and fitted correctly. There are several types of bobbin, subtly different. The bobbin case holder has a sharp point which catches the top thread. Problems can result if this has been roughened by needle strikes. Smooth it with fine emery as described under [[#Maintenance|Maintenance]].
Ensure the bobbin is the correct type for the machine and is threaded and fitted correctly. There are several types of bobbin, subtly different. The bobbin case holder has a sharp point which hooks the top thread in order to pass it around the bobbin. Problems can result if this has been roughened by needle strikes. Smooth it with fine emery as described under [[#Maintenance|Maintenance]].


Before starting to sew, make sure there isn't excessive slack in  the top thread. If you have just fitted the bobbin, place your finger on the loose end of the top thread and turn the hand wheel as if to make one stitch. When you now pull the top thread it should draw up the bottom thread. Place your finger on the loose ends of both threads as you make the first stitch or two otherwise they may snag.
Before starting to sew, make sure there isn't excessive slack in  the top thread. If you have just fitted the bobbin, place your finger on the loose end of the top thread and turn the hand wheel as if to make one stitch. When you now pull the top thread it should draw up the bottom thread. Place your finger on the loose ends of both threads as you make the first stitch or two otherwise they may snag.
Line 82: Line 86:


Also, check the belt tension. Check out the page on [[Electric motors]] if the motor may be faulty. Replacing the brushes or cleaning the commutator might be necessary. The motor bearings can be lubricated with light lubricating oil.
Also, check the belt tension. Check out the page on [[Electric motors]] if the motor may be faulty. Replacing the brushes or cleaning the commutator might be necessary. The motor bearings can be lubricated with light lubricating oil.
===Continuous running===
Sometimes a sewing machine will run continuously, whatever you do with the foot control. This indicates a failed suppressor capacitor connected across the switch and rheostat in the foot control. You should replace it by a Class Y capacitor of the same capacitance (measured in nF or µF). See Capacitors in [[Basic_electronic_components#Identification_3|Basic Electronic Components]] for more details.


==Maintenance==
==Maintenance==
[[File:Img_0424a.jpg|180px|thumb|left|Top mechanism.]]
===Cleaning===
The first thing to do (before disassembly) is to remove all dust and fluff. Between the feed dogs is a favourite place for it to collect. Remove the needle plate (through which the feed dogs protrude) to facilitate cleaning. Where it has become matted you can pick it out with a pin or a needle, otherwise use a brush and/or a vacuum cleaner crevice tool. You can use a can of compressed air but be careful you don't simply blow the fluff further into the mechanism. Look out for any pieces of broken needle which have come to rest here and might jam the mechanism.
The first thing to do (before disassembly) is to remove all dust and fluff. Between the feed dogs is a favourite place for it to collect. Remove the needle plate (through which the feed dogs protrude) to facilitate cleaning. Where it has become matted you can pick it out with a pin or a needle, otherwise use a brush and/or a vacuum cleaner crevice tool. You can use a can of compressed air but be careful you don't simply blow the fluff further into the mechanism. Look out for any pieces of broken needle which have come to rest here and might jam the mechanism.
[[File:Img_0406a.jpg|180px|thumb|right|Bottom mechanism.]]


Check for and remove any dust, fluff or pieces of broken thread where the thread passes between the discs of the upper tension adjuster.
Check for and remove any dust, fluff or pieces of broken thread where the thread passes between the discs of the upper tension adjuster.


===Oiling===
[[File:Img_0424a.jpg|180px|thumb|left|Top mechanism.]]
[[File:Img_0406a.jpg|180px|thumb|right|Bottom mechanism.]]
A well used machine may need lubrication and cleaning several times a year. Once a year is beneficial even for light or occasional use. Older machines allow easy access to the mechanism. Newer machines tend to be completely enclosed in plastic. There may be screws holding the case together but even after removing these it may be tricky to open. If the case is in two halves, probe the crack between them. You will probably find a series of clips that can be released with a thin spatula or knife, or a prying tool, or it may become evident that there remain one or more screws to remove.
A well used machine may need lubrication and cleaning several times a year. Once a year is beneficial even for light or occasional use. Older machines allow easy access to the mechanism. Newer machines tend to be completely enclosed in plastic. There may be screws holding the case together but even after removing these it may be tricky to open. If the case is in two halves, probe the crack between them. You will probably find a series of clips that can be released with a thin spatula or knife, or a prying tool, or it may become evident that there remain one or more screws to remove.


Next, oil anything that moves. Remember, use nothing but sewing machine oil. There will be various levers, cams, cogs and bearings both in the top of the machine driving the needle, and under the base driving the bobbin and feed dogs. Apply no more than a drop of oil, wipe away any excess, and avoid getting it anywhere where it could contaminate the next sewing job.
Next, oil anything that moves. Remember, use nothing but sewing machine oil. There will be various levers, cams, cogs and bearings both in the top of the machine driving the needle, and under the base driving the bobbin and feed dogs. Apply no more than a drop of oil, wipe away any excess, and avoid getting it anywhere where it could contaminate the next sewing job.


Remove the bobbin and bobbin case, and any dust or fluff on them. The bobbin case fits into a bobbin case holder which rotates as the machine operates. It should be easily removed, for example by releasing a pair of clips on a retaining ring. It has a sharp point which catches the upper thread in order to engage it with the lower thread. Run your finger over this and if it feels rough (probably due to needle strikes) then smooth it with fine emery. Take care to reassemble it correctly.
===Bobbin and bobbin case and needle===
{|
Remove the bobbin and bobbin case, and any dust or fluff on them. The bobbin case fits into a bobbin case holder which rotates as the machine operates. It should be easily removed, for example by releasing a pair of clips on a retaining ring. It has a sharp point which hooks the upper thread so as to engage it with the lower thread. Run your finger over this and if it feels rough (probably due to needle strikes) then smooth off any burrs with fine emery. Take care to reassemble it correctly.
|- style="vertical-align: top;"
<gallery mode="packed" caption="">
|[[File:Img_0414a.jpg|150x90px|thumb|Removing the bobbin case.]]
File:Img_0414a.jpg|Removing the bobbin case.
|[[File:Img_0413a.jpg|150x90px|thumb|Bobbin case removal (machine on its side).]]
File:Img_0413a.jpg|Bobbin case removal (machine on its side).
|[[File:Img_0412a.jpg|150x90px|thumb|Bobbin case holder retaining ring.]]
File:Img_0412a.jpg|Bobbin case holder retaining ring.
|[[File:Img_0411a.jpg|150x90px|thumb|Bobbin case holder in place.]]
File:Img_0411a.jpg|Bobbin case holder in place.
|[[File:Img_0407a.jpg|150x90px|thumb|Bobbin case holder removed for inspection.]]
File:Img_0407a.jpg|Bobbin case holder removed for inspection.
|}
</gallery>
Note that some older (especially pre-war) machines have a quite different design of bobbin. This fits in a bullet-shaped shuttle which is thrown through a loop in the upper thread to make each stitch. Modern machines either have front loading bobbins similar to the photos though often accessed from the front of the machine, or top loading bobbins where a similar mechanism is mounted horizontally.
Note that some older (especially pre-war) machines have a quite different design of bobbin. This fits in a bullet-shaped shuttle which is thrown through a loop in the upper thread to make each stitch. Modern machines either have front loading bobbins similar to the photos though often accessed from the front of the machine, or top loading bobbins where a similar mechanism is mounted horizontally.


Check for any roughness on the needle, possibly caused by it striking something. It can be smoothed with fine emery but is probably better replaced and should be replaced as a matter of course after 6 - 8 hours of sewing.
Check for any roughness on the needle, possibly caused by it striking something. It can be smoothed with fine emery but is probably better replaced and should be replaced as a matter of course after 6 - 8 hours of sewing.


===Bobbin tension===
[[File:Img_0447a.jpg|180px|thumb|left|Bobbin spring and tension screw.]]
[[File:Img_0447a.jpg|180px|thumb|left|Bobbin spring and tension screw.]]
[[File:Img_0434a.jpg|180px|thumb|right|Checking the bobbin tension.]]
[[File:Img_0434a.jpg|180px|thumb|right|Checking the bobbin tension.]]
It's important to check the bobbin tension as you will get poor results and possibly broken or snagging thread if it's wrong. Fit a bobbin of thread to the bobbin case and thread it under the tension spring. Suspend it by the thread. The tension is correct if the tension is just sufficient to support the weight of the bobbin and case. Adjust the tension by adjusting the screw in the tension spring.
It's important to check the bobbin tension as you will get poor results and possibly broken or snagging thread if it's wrong. Fit a bobbin of thread to the bobbin case and thread it under the tension spring. Suspend it by the thread. The tension is correct if the tension is just sufficient to support the weight of the bobbin and case. Adjust the tension by adjusting the screw in the tension spring.


Finally, examine the bobbin winder. This often engages with the hand wheel by means of a wheel with a rubber tyre. If the tyre is worn or cracked or perished, replace it. Spares are generally easy to obtain.
===Bobbin winder===
Examine the bobbin winder. This often engages with the hand wheel by means of a wheel with a rubber tyre. If the tyre is worn or cracked or perished, replace it. Spares are generally easy to obtain.
 
===Electrics===
Check that the foot pedal allows smooth control of the speed, and lubricate (after disconnecting from the mains) if necessary.
 
If the machine is fitted with a lamp to illuminate the work, check the bulb. A replacement is easily fitted on older machines, but it may be harder on newer ones where the works are totally enclosed in plastic. Consider replacing a filament bulb with a more modern LED equivalent which will run much cooler. Take the old one with you to make sure you get a new one with the same sort of base. Some are Edison Screw (ES) whereas others are Bayonet Cap (BC) and there are two common sizes of each.
 
===Timing===
[[File:Img_0536a.jpg|180px|thumb|right|Checking the timing.]]
If you are getting unexplained broken threads, it could be that the timing needs adjustment. This is beyond what can be covered at this level and may be best left to a professional with the appropriate service manual, but it's not too difficult to see whether this is indeed the problem.
 
You need to be able to see the needle and the hook at the point where the hook catches the top thread. In the photo, the machine is turned on its side to show the underneath, and the bobbin and and the plate which holds the bobbin carrier in place have been removed.
 
With the needle threaded, turn the handwheel until the hook passes the needle, whilst holding the free end of the thread taught, but without pulling on it.
 
The tip of the hook should pass the needle just after it has reached its lowest point. Typically, the needle should have risen 3/16 of an inch (1/10 of an inch, or 2.5mm). At this point, the rising needle causes the thread to go slack and form a loop which is caught by the hook. The photo shows the thread having been securely caught after the handwheel has been turned a little further.
 
Turning the handwheel still further, you should see the thread drawn around the bobbin (if you have it in place) so as to make a stitch.
 
If the alternative is to scrap the machine, by all means search online for your make and model of machine with the key words "timing adjustment" appended, and you should at least be able to see what is involved in adjusting the timing. You need to ensure both that the lowest point of the needle brings the eye to the right level beneath the hook, and also that the hook passes the needle after it has risen by the prescribed amount. These settings and how to adjust them should be given in the machine's service manual, if you can get hold of it.
 
==External links==
 
Consult Sewing Machines at:
<p>
<span class="btn btn-primary" style="background:white;color:black;text-transform: none;">
[https://www.repaircafe.org/en/sewing-machine-broken-repair-cafe-fixes/ Repair Café]
</span>
<p>
<span class="btn btn-primary" style="background:white;color:black;text-transform: none;">
[https://www.ifixit.com/Device/Sewing_Machine iFixit]
</span>
 
==Acknowledgements and Further Reading==
 
This page is based on the content of a Restarters' Skillshare given in 2016 by sewing machine expert Jennie Caminada of [https://www.cheekyhandmades.co.uk/contact-me/ Cheeky Handmades], written up with assistance from clothing reuse charity [http://traid.org.uk/ Traid] and researcher/activist Bridget Harvey.
 
Jennie offered many further tips at Fixfest 2020 in a session on sewing machines. [https://notes.fixfest.org/p/sewing_machines Extensive notes] on the session are well worth reading.
 
Most recently (2023), Jennie recorded much the ssame material for us in this [https://www.youtube.com/watch?v=5vLanOnZzUk YouTube video].


[[Category:Fixing]]
[[Category:Fixing]]

Latest revision as of 21:22, 26 March 2024

This page covers the principles of operation, maintenance, and common problems encountered with domestic sewing machines.

Summary

Older sewing machines, well maintained, are virtually indestructible, but newer machines often have plastic parts which wear out quite quickly. Nevertheless, all machines can give longer service with simple maintenance as described here.

If you're having problems with your sewing machine, here's a quick checklist of things to try. Come back here for more details if you're still struggling.

The descriptions and accompanying pictures in this page show a vintage sewing machine probably dating from the 1950's or 60's. The advantage for demonstration purposes is that this has all the basic controls and mechanisms, easily seen rather than hidden behind plastic.

Safety

Warning03.png
Always unplug from the mains before starting any maintenance or repair work, in order to eliminate the risk of electric shock or physical injury from moving parts.
When plugged in, at all times make sure either that all fingers are well away from moving parts, especially the needle, and that your feet (and anyone else's) are well away from the foot pedal.
Sewing machine oil is highly flammable and can be ignited by overheating parts or sparks from the motor. Always wipe away any excess.
Older machines (in particular) can easily weigh 20kg. Take care when lifting or when tipping over to service the under side.

Warning

On no account use anything but sewing machine oil to lubricate the mechanism. Do not use WD40, or 3-in-1, or bicycle oil, or engine oil, or grease, or olive oil, or Vaseline, or lubricating jelly, or snake oil, or peanut butter. None of these are sewing machine friendly.

Spare parts

Spare parts for modern machines may be available directly from the manufacturer or a distributor. For older machines, eBay is always a good place to look. Helen Howes in Norfolk holds a wide range of parts.

Bobbins and needles are available at any good haberdashers. Spare and alternative feet are commonly available (check the height of the fixing screw from the base of the machine) and replacement belts shouldn't be a problem, nor replacement rubber tyres for bobbin winders. Complete bobbin winders are available for classic Singer machines using a bullet-type shuttle, but for others there are many different designs and you may have more trouble.

Sewing Machine Basics

Regular users of a sewing machine will be familiar with its operation and can skip this section, which is provided for occasional users or those simply faced with a non-working machine.

Beginners may also like to refer to the online tutorial Sewing Machine 911. (Free registration required.)

If you're not sure how a sewing machine manages to sew, this neat animation shows it very clearly. (Note, though, that the hook doesn't necessarily rotate a full 360 degrees. On some machines it only takes it a little over 180 degrees before returning the way it came, with the thread tension pulling it the rest of the way.)

Sewing Machine Controls

Sewing machine controls 1/4.

At the business end of the sewing machine, the foot presses down on the work, enabling the feed dogs below to feed it through the machine by a kind of walking motion. Alternative feet may be provided for different jobs. They are secured to the vertical shaft with a knurled knob.

Sewing machine controls 2/4.

A screw or knob clamps the needle to its shaft. Needles normally have a flat side which clamps against the flat of the shaft.

An adjustment on the top allows the pressure of the foot on the work to be adjusted.

The top thread passes through an adjustable tensioner, allowing the tension of the top thread to be equalised with that of the bottom thread. When properly adjusted, the threads should engage with one another within the fabric. Badly adjusted, the top thread will lie on top of the fabric or the bottom thread on the bottom, with the other thread passing through the fabric and back again.

Sewing machine controls 3/4.

Behind the head of the machine a lever allows the foot to be raised in order to insert or withdraw the work, and lowered in order to sew. This is normally operated blind by feel.

The hand wheel on the right is driven by a belt from the motor. You can turn it by hand to stitch one stitch at a time, or to ensure the needle is disengaged before inserting or removing the work. Always turn it towards you (the same direction as the motor turns it) and never backwards.

A bobbin winder (missing on this particular machine) engages with the hand wheel in order to load bobbins with thread. A knurled knob on the hand wheel allows it to be disengaged from the sewing machine mechanism whilst winding bobbins.

Sewing machine controls 4/4.

The stitch length adjuster varies the distance the work is moved between stitches. The reversing button (or lever) allows you to sew in the reverse direction. (You should always do a couple of reverse stitches at the start and end of a line of stitching to lock the ends.)

The zigzag width control allows alternate stitches to be offset sideways to produce zigzag stitching. More modern machines often have a plethora of stitching styles controlled in a similar way.

The feed dog height adjustment allows the feed dogs to optimally grip fabrics of different types.

Common problems and solutions

Breaking needles

First of all, ensure you've threaded the machine correctly. It may be that you are using the wrong type of needle. For normal use on light fabrics, a size 10 or thereabouts should work well, but on heavier cloth such as denim or canvas a needle size up to 16 will be required. For leather or vinyl you will need a wedge-point needle.

Machine seized up

After many years of disuse a machine may completely seize up. Lubricate thoroughly as described under Maintenance. You may have to leave the oil for a while in order to ease the parts and repeat several times, wiping away any excess.

Snagging or breaking thread

First of all, if you have disassembled anything, make sure you have reassembled it correctly and that you can turn the hand wheel freely. Ensure the needle isn't bent and that it feels smooth as you run it between your fingers from the shank to the tip. A new needle is recommended after 6 - 8 hours of sewing.

Make sure the machine is threaded correctly with good quality thread - an incorrectly threaded machine will never work. If you don't have a printed instruction booklet, look on the Internet for instructions for the same or a similar model. On some machines you thread the needle from left to right, and from right to left on others. It's important to get it right.

Check that the needle is fitted correctly. The flat on the shank of the needle lies against a flat on the needle holder with the needle pushed up as high as it will go. Tighten the screw but only as much as you can with your fingers.

Ensure the bobbin is the correct type for the machine and is threaded and fitted correctly. There are several types of bobbin, subtly different. The bobbin case holder has a sharp point which hooks the top thread in order to pass it around the bobbin. Problems can result if this has been roughened by needle strikes. Smooth it with fine emery as described under Maintenance.

Before starting to sew, make sure there isn't excessive slack in the top thread. If you have just fitted the bobbin, place your finger on the loose end of the top thread and turn the hand wheel as if to make one stitch. When you now pull the top thread it should draw up the bottom thread. Place your finger on the loose ends of both threads as you make the first stitch or two otherwise they may snag.

Poor speed control

If nothing happens when you press the foot pedal a little, but the machine races when you press it just a little more then it will be very hard to sew successfully. The foot pedal may simply need lubricating. On older machines this will contain a rheostat, which is a variable resistance wired in series with the motor. Newer machines will more likely have an electronic speed control similar to a dimmer switch.

First, double check that it's not still plugged in. You will need to examine it to determine how to disassemble it. Do not use sewing machine oil, but rather any light lubricating oil, or grease on sliding parts, and keep oil and grease away from all electrical contacts.

Also, check the belt tension. Check out the page on Electric motors if the motor may be faulty. Replacing the brushes or cleaning the commutator might be necessary. The motor bearings can be lubricated with light lubricating oil.

Continuous running

Sometimes a sewing machine will run continuously, whatever you do with the foot control. This indicates a failed suppressor capacitor connected across the switch and rheostat in the foot control. You should replace it by a Class Y capacitor of the same capacitance (measured in nF or µF). See Capacitors in Basic Electronic Components for more details.

Maintenance

Cleaning

The first thing to do (before disassembly) is to remove all dust and fluff. Between the feed dogs is a favourite place for it to collect. Remove the needle plate (through which the feed dogs protrude) to facilitate cleaning. Where it has become matted you can pick it out with a pin or a needle, otherwise use a brush and/or a vacuum cleaner crevice tool. You can use a can of compressed air but be careful you don't simply blow the fluff further into the mechanism. Look out for any pieces of broken needle which have come to rest here and might jam the mechanism.

Check for and remove any dust, fluff or pieces of broken thread where the thread passes between the discs of the upper tension adjuster.

Oiling

Top mechanism.
Bottom mechanism.

A well used machine may need lubrication and cleaning several times a year. Once a year is beneficial even for light or occasional use. Older machines allow easy access to the mechanism. Newer machines tend to be completely enclosed in plastic. There may be screws holding the case together but even after removing these it may be tricky to open. If the case is in two halves, probe the crack between them. You will probably find a series of clips that can be released with a thin spatula or knife, or a prying tool, or it may become evident that there remain one or more screws to remove.

Next, oil anything that moves. Remember, use nothing but sewing machine oil. There will be various levers, cams, cogs and bearings both in the top of the machine driving the needle, and under the base driving the bobbin and feed dogs. Apply no more than a drop of oil, wipe away any excess, and avoid getting it anywhere where it could contaminate the next sewing job.

Bobbin and bobbin case and needle

Remove the bobbin and bobbin case, and any dust or fluff on them. The bobbin case fits into a bobbin case holder which rotates as the machine operates. It should be easily removed, for example by releasing a pair of clips on a retaining ring. It has a sharp point which hooks the upper thread so as to engage it with the lower thread. Run your finger over this and if it feels rough (probably due to needle strikes) then smooth off any burrs with fine emery. Take care to reassemble it correctly.

Note that some older (especially pre-war) machines have a quite different design of bobbin. This fits in a bullet-shaped shuttle which is thrown through a loop in the upper thread to make each stitch. Modern machines either have front loading bobbins similar to the photos though often accessed from the front of the machine, or top loading bobbins where a similar mechanism is mounted horizontally.

Check for any roughness on the needle, possibly caused by it striking something. It can be smoothed with fine emery but is probably better replaced and should be replaced as a matter of course after 6 - 8 hours of sewing.

Bobbin tension

Bobbin spring and tension screw.
Checking the bobbin tension.

It's important to check the bobbin tension as you will get poor results and possibly broken or snagging thread if it's wrong. Fit a bobbin of thread to the bobbin case and thread it under the tension spring. Suspend it by the thread. The tension is correct if the tension is just sufficient to support the weight of the bobbin and case. Adjust the tension by adjusting the screw in the tension spring.

Bobbin winder

Examine the bobbin winder. This often engages with the hand wheel by means of a wheel with a rubber tyre. If the tyre is worn or cracked or perished, replace it. Spares are generally easy to obtain.

Electrics

Check that the foot pedal allows smooth control of the speed, and lubricate (after disconnecting from the mains) if necessary.

If the machine is fitted with a lamp to illuminate the work, check the bulb. A replacement is easily fitted on older machines, but it may be harder on newer ones where the works are totally enclosed in plastic. Consider replacing a filament bulb with a more modern LED equivalent which will run much cooler. Take the old one with you to make sure you get a new one with the same sort of base. Some are Edison Screw (ES) whereas others are Bayonet Cap (BC) and there are two common sizes of each.

Timing

Checking the timing.

If you are getting unexplained broken threads, it could be that the timing needs adjustment. This is beyond what can be covered at this level and may be best left to a professional with the appropriate service manual, but it's not too difficult to see whether this is indeed the problem.

You need to be able to see the needle and the hook at the point where the hook catches the top thread. In the photo, the machine is turned on its side to show the underneath, and the bobbin and and the plate which holds the bobbin carrier in place have been removed.

With the needle threaded, turn the handwheel until the hook passes the needle, whilst holding the free end of the thread taught, but without pulling on it.

The tip of the hook should pass the needle just after it has reached its lowest point. Typically, the needle should have risen 3/16 of an inch (1/10 of an inch, or 2.5mm). At this point, the rising needle causes the thread to go slack and form a loop which is caught by the hook. The photo shows the thread having been securely caught after the handwheel has been turned a little further.

Turning the handwheel still further, you should see the thread drawn around the bobbin (if you have it in place) so as to make a stitch.

If the alternative is to scrap the machine, by all means search online for your make and model of machine with the key words "timing adjustment" appended, and you should at least be able to see what is involved in adjusting the timing. You need to ensure both that the lowest point of the needle brings the eye to the right level beneath the hook, and also that the hook passes the needle after it has risen by the prescribed amount. These settings and how to adjust them should be given in the machine's service manual, if you can get hold of it.

External links

Consult Sewing Machines at:

Repair Café

iFixit

Acknowledgements and Further Reading

This page is based on the content of a Restarters' Skillshare given in 2016 by sewing machine expert Jennie Caminada of Cheeky Handmades, written up with assistance from clothing reuse charity Traid and researcher/activist Bridget Harvey.

Jennie offered many further tips at Fixfest 2020 in a session on sewing machines. Extensive notes on the session are well worth reading.

Most recently (2023), Jennie recorded much the ssame material for us in this YouTube video.