Sewing machines: Difference between revisions
(Created page with "This page covers the maintenance of domestic sewing machines. ==Summary== Older sewing machines are virtually indestructible and with simple maintenance can continue to give ...") |
No edit summary |
||
| Line 7: | Line 7: | ||
[[File:Warning03.png|30px|left]] | [[File:Warning03.png|30px|left]] | ||
::Always unplug from the mains before staring any maintenance or repair work, in order to eliminate the risk of electric shock or physical injury from moving parts. | ::Always unplug from the mains before staring any maintenance or repair work, in order to eliminate the risk of electric shock or physical injury from moving parts. | ||
::Sewing machine oil is highly flammable and can be ignited by overheating parts. | |||
::Older machines, particularly can weigh as much as 20kg. Take care when lifting or when tipping over to service the under side. | ::Older machines, particularly can weigh as much as 20kg. Take care when lifting or when tipping over to service the under side. | ||
| Line 17: | Line 18: | ||
==Common problems and solutions== | ==Common problems and solutions== | ||
===Machine seized up=== | ===Machine seized up=== | ||
After many years of disuse a machine may completely seize up. Lubricate thoroughly as described under Maintenance. You may have to leave the oil for a while in order to ease the parts and repeat several times, wiping away any excess. | After many years of disuse a machine may completely seize up. Lubricate thoroughly as described under [[#Maintenance|Maintenance]]. You may have to leave the oil for a while in order to ease the parts and repeat several times, wiping away any excess. | ||
===Snagging or breaking thread=== | ===Snagging or breaking thread=== | ||
First of all, if you have disassembled anything, make sure you have reassembled it correctly and that you can turn the hand wheel freely. Ensure the needle isn't bent and that it feels smooth as you run it between your fingers from the shank to the tip. | |||
Make sure the machine is threaded correctly. If you don't have a printed instruction booklet, look on the Internet for instructions for the same or a similar model. On some machines you thread the needle from left to right, and from right to left on others. It's important to get it right. | |||
Ensure the bobbin is threaded and fitted correctly. The bobbin carrier has a sharp point which catches the top thread. Problems can result if this has been roughened by needle strikes. Smooth it with fine emery as described under [[#Maintenance|Maintenance]]. | |||
===Poor speed control=== | ===Poor speed control=== | ||
Revision as of 14:56, 28 January 2016
This page covers the maintenance of domestic sewing machines.
Summary
Older sewing machines are virtually indestructible and with simple maintenance can continue to give good service almost indefinitely. Newer machines often have plastic parts which wear out quite quickly. Nevertheless, all machines can give longer service, properly cared for.
Safety
- Always unplug from the mains before staring any maintenance or repair work, in order to eliminate the risk of electric shock or physical injury from moving parts.
- Sewing machine oil is highly flammable and can be ignited by overheating parts.
- Older machines, particularly can weigh as much as 20kg. Take care when lifting or when tipping over to service the under side.
Warning
On no account use anything but sewing machine oil to lubricate the mechanism. Do not use WD40, or 3-in-1, or bicycle oil, or engine oil, or olive oil, or vaseline, or snake oil, or peanut butter. None of these are sewing machine friendly.
Sewing Machine Principles
Regular users of a sewing machine will be familiar with its operation and can skip this section, which is provided for occasional users or those simply faced with a non-working machine.
Common problems and solutions
Machine seized up
After many years of disuse a machine may completely seize up. Lubricate thoroughly as described under Maintenance. You may have to leave the oil for a while in order to ease the parts and repeat several times, wiping away any excess.
Snagging or breaking thread
First of all, if you have disassembled anything, make sure you have reassembled it correctly and that you can turn the hand wheel freely. Ensure the needle isn't bent and that it feels smooth as you run it between your fingers from the shank to the tip.
Make sure the machine is threaded correctly. If you don't have a printed instruction booklet, look on the Internet for instructions for the same or a similar model. On some machines you thread the needle from left to right, and from right to left on others. It's important to get it right.
Ensure the bobbin is threaded and fitted correctly. The bobbin carrier has a sharp point which catches the top thread. Problems can result if this has been roughened by needle strikes. Smooth it with fine emery as described under Maintenance.