Steam Irons: Difference between revisions
(Created page with "This page covers steam irons. ==Summary== Steam irons are quite often seen at Restart parties. They can be challenging to open. ==Disassembly== Usually there will be an easi...") Â |
No edit summary |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 2: | Line 2: | ||
==Summary== | ==Summary== | ||
Steam irons are quite often seen at Restart parties. They can be challenging to open. | Steam irons are quite often seen at Restart parties. They can be challenging to open, and as with any appliance which mixes water and electricity the fault can often be due to a failure, ultimately, to keep them sufficiently apart. | ||
==Disassembly== | ==Disassembly== | ||
Usually there will be | [[File:Img_0373a.jpg|200px|thumb|right|Steam iron disassembly.]] | ||
Usually there will be one or two easily accessible screws at the back of the handle but these may only release that part of the handle. Another screw or screws near the front may be hidden for example under the steam button, but even after removing these the handle cover can be tricky to remove. Often there will be a series of clips down the sides, but this may not be all. In the iron illustrated there was another clip to be released on the top just forward of the cable which required the whole of the top cover to be pushed forward. | |||
 | |||
With the top cover off it should be possible to find the screws which release the whole of the plastic top, in order to access the thermostat etc. and (if not already accessible) to replace the mains lead. | |||
 | |||
On reassembly, ensure that any tubes associated with the water reservoir and steam delivery are properly connected. | |||
[[Category:General]] | [[Category:General]] | ||
Revision as of 14:02, 1 August 2016
This page covers steam irons.
Summary
Steam irons are quite often seen at Restart parties. They can be challenging to open, and as with any appliance which mixes water and electricity the fault can often be due to a failure, ultimately, to keep them sufficiently apart.
Disassembly
Usually there will be one or two easily accessible screws at the back of the handle but these may only release that part of the handle. Another screw or screws near the front may be hidden for example under the steam button, but even after removing these the handle cover can be tricky to remove. Often there will be a series of clips down the sides, but this may not be all. In the iron illustrated there was another clip to be released on the top just forward of the cable which required the whole of the top cover to be pushed forward.
With the top cover off it should be possible to find the screws which release the whole of the plastic top, in order to access the thermostat etc. and (if not already accessible) to replace the mains lead.
On reassembly, ensure that any tubes associated with the water reservoir and steam delivery are properly connected.