Steam Irons
This page covers steam irons.
Summary
Steam irons are quite often seen at Restart parties. They can be challenging to open.
Disassembly
Usually there will be one or two easily accessible screws at the back of the handle but these only release that part of the handle. Another screw near the front may be hidden, but even after removing this, the handle cover is hard to remove. There is likely to be a series of clips down the sides, but this may not be all. In the iron illustrated there was another clip to be released on the top just forward of the cable which required the whole of the top cover to be pushed forward.
With the top cover off it should be possible to find the screws which release the whole of the plastic top, in order to access the thermostat etc. and (if not already accessible) to replace the mains lead.
On reassembly, ensure that any tubes associated with the water reservoir and steam delivery are properly connected.