Glossary:Polyfuse: Difference between revisions
(Created page with "A polyfuse or polyswitch or polymeric positive temperature coefficient (PPTC) device is an alternative to a conventional fuse for protection against a dangerously large current flow in a fault condition. It consists of a polymer loaded with carbon particles. An excessive current causes it to heat up and the polymer to expand so that the carbon particles are no longer in contact. As a result, the current can no longer flow until it's allowed to cool down. See Polyfuses in...") |
m (Philip moved page Glossary/Polyfuse to Glossary:Polyfuse without leaving a redirect) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
A polyfuse or polyswitch or polymeric positive temperature coefficient (PPTC) device is an alternative to a conventional fuse for protection against a dangerously large current flow in a fault condition. It consists of a polymer loaded with carbon particles. An excessive current causes it to heat up and the polymer to expand so that the carbon particles are no longer in contact. As a result, the current can no longer flow until it's allowed to cool down. See Polyfuses in the Wiki. | A polyfuse or polyswitch or polymeric positive temperature coefficient (PPTC) device is an alternative to a conventional fuse for protection against a dangerously large current flow in a fault condition. It consists of a polymer loaded with carbon particles. An excessive current causes it to heat up and the polymer to expand so that the carbon particles are no longer in contact. As a result, the current can no longer flow until it's allowed to cool down. See [[Protection_components#Polyfuses|Polyfuses]] in the Wiki. | ||
Latest revision as of 11:37, 8 October 2022
A polyfuse or polyswitch or polymeric positive temperature coefficient (PPTC) device is an alternative to a conventional fuse for protection against a dangerously large current flow in a fault condition. It consists of a polymer loaded with carbon particles. An excessive current causes it to heat up and the polymer to expand so that the carbon particles are no longer in contact. As a result, the current can no longer flow until it's allowed to cool down. See Polyfuses in the Wiki.